Rain Snow Fog AI Video Prompts That Look Real

November 4, 2026 •Updated November 8, 2026 • By Bank K.

To get believable weather in an AI video, describe three things: the matter in the air (size, speed, density), what it does to surfaces (wet reflections, snow settling), and how light moves through it (backlight, visible rays). Google’s own Veo prompt guide uses plain weather terms like “light drizzle,” “gentle snowfall” and “swirling fog,” so you don’t need exotic wording.

Here is a rain prompt built that way. Paste it as is, then swap the location.

Medium shot of a woman waiting at the curb of an empty city crosswalk in steady, medium-sized rain. Fine streaks fall through the glow of a streetlight behind her, and each drop lights up as it passes the backlight. The asphalt is wet and mirrors the red traffic signal in long vertical reflections. Small ripples spread in the puddles. Slow push-in, 35mm, shallow depth of field.

The rest of this post is organized by failure: what goes wrong with each weather type, and the words I add to fix it. For light setups that pair with these, see AI video lighting prompts.

Why does AI rain look fake, and how do I fix it?

The usual failure is rain that looks like a stock overlay: uniform white lines pasted over a dry scene. Rain is falling water, plus the way surfaces react, plus moisture in the air. If your prompt only covers the first part, the other two get skipped.

Weak:

A man walking in the rain.

Fixed:

A man in a dark jacket walks along a sidewalk in steady rain. Medium-sized drops bead and run down his shoulders. The pavement is wet and reflects shop signs, and a thin mist hangs above the street. A streetlight behind him backlights the rain so the drops glow. Tracking shot from the side.

Google’s sample prompt in the Veo guide points the same way. It pairs a “rain-slicked, crumbling street” with a “gentle, constant rain” that creates “shimmering reflections in the puddles below.” Rain and the wet ground are written together. If you want water to look wet from below the surface, these underwater AI video prompts use the same idea.

Three more rain variations, none of them a night street, so they don’t overlap the noir look:

Close-up of rain hitting a car windshield on a gray afternoon. Large drops smear and slide in uneven paths while the wipers sweep once. Blurred green trees and brake lights sit soft behind the glass. Static camera.
Wide shot of a farmers' market in light drizzle. Tiny drops are barely visible except where they catch the backlight. Striped awnings drip in lines, the cobblestones have a dark wet sheen, and shoppers hold clear umbrellas. Cool overcast light.
Low angle on yellow rubber boots stepping through a puddle in a playground in rain. Splashes break into small droplets and the surface ripples outward. Slow motion.

Ask for “steady” or “medium-sized” rain instead of “heavy rain” unless you want a downpour. In my clips, “heavy rain” often turns the whole frame into a gray sheet with no individual drops. Medium-sized drops is the first fix I reach for. For rain in a noir setting, see the film noir prompts.

How do I stop snow from floating?

Floating snow happens when flakes drift with no speed, no direction and no effect on the ground. Fix it by naming fall speed, flake size and what the snow does when it lands.

Weak:

A cabin in the snow.

Fixed:

A wooden cabin at dusk in gentle snowfall. Large soft flakes fall slowly and slightly sideways in a light breeze. Fresh snow sits on the roof edge and the porch rail, and footprints leading to the door are partly filled in. Warm yellow window light, blue shadows on the snow. Static wide shot.

Google’s guide includes the ambiance example “gentle falling snow creating a soft blanket,” which is the same idea: snow plus what it covers.

More snow prompts:

Close-up of a gloved hand held out in light flurries. Small flakes land, sit for a moment, then melt into dark wet spots on the leather. Shallow depth of field, flakes in the background as soft bokeh.
Medium shot of a woman walking down a quiet street in heavy, steady snowfall. Dense flakes fall fast and slant to the left. Her scarf lifts in the wind and her breath is visible. Streetlights glow through the snow. Tracking shot from behind.
Wide shot of a pine forest in a snowstorm. Wind drives fine snow across the ground in low ribbons while heavy flakes fall from above. Branches sag under thick white loads and drop small clumps. Muted gray light.

Accumulation is slow, and your clip is short. Build the “after” state into the first frame (snow already on the roof) rather than asking the model to pile it up in a few seconds.

How do I get fog that has depth instead of a flat haze?

Flat fog is a uniform gray wash over the whole frame. Real fog gets denser with distance, so ask for layers: clear foreground, a mid layer, and a far layer that fades out.

Weak:

A foggy forest.

Fixed:

A forest path at dawn in thick fog. The nearest trees are sharp and dark, the middle trees are softer, and the far trees fade into pale gray. Low wisps of fog drift slowly between the trunks. Low sunlight enters from the left and creates visible light rays through the haze. Slow dolly forward.

“Volumetric lighting creating visible light rays” appears in the Veo guide’s lighting examples. It is what makes fog look three-dimensional. The guide’s ambiance examples also include “thick fog rolling across a moor.”

More fog prompts:

Wide shot of a harbor at night in dense fog. A lighthouse beam sweeps slowly and becomes a visible cone in the haze. Fishing boats sit as dark silhouettes at different distances, each one fainter than the last. Water is still and black.
Aerial view of a mountain valley at sunrise with a low sea of fog. Ridge tops rise out of the cloud in three layers, each paler than the one in front. Fog rolls slowly along the valley floor. Warm light on the peaks.
Medium shot of a lone figure on a moor in thick fog rolling in from the right. Edges of the figure soften as the fog passes in front. Damp grass, gray-green palette, muted light.

For drone-style versions of these, the drone and aerial prompts cover the camera side.

How do I prompt storms, wind and lightning?

Storm clips fail when everything is still except the rain. Wind has to show up on things that move: cloth, hair, branches, grass. Name the object and the direction.

Wide shot of a lone oak on a hill under dark storm clouds. Strong wind bends the branches to the right and tears leaves loose in a stream. Tall grass flattens in waves. Heavy rain crosses the frame at a steep angle. Gray-green light.
Medium shot of a woman on a seaside pier in a gale. Her coat snaps hard behind her and wet hair whips across her face. Rain blows sideways and waves crash against the pilings, throwing spray over the rail. Handheld, slight shake.

For lightning, use timing words and a sequence: dark first, flash, then the lit scene. In my experience the exact second is hit or miss, so I generate several versions and pick the one where the flash lands where I want it.

A dark farmhouse in a field at night under heavy rain. For the first two seconds the scene is almost black. Then a single bright lightning flash lights the house and the wet field in hard white light, casting sharp shadows. The scene falls back to dark. Static wide shot.

If a storm creeps into a clip that should be calm, add it to your negative prompt. Google’s example negative prompt lists “dark, stormy, or threatening atmosphere.” The guide also advises against instructive words such as “no” or “don’t” and says to describe what you don’t want to see. More in negative prompts for AI video.

What happens if only the weather line changes?

Here is the test I run on any new scene. Keep one prompt fixed and swap a single weather sentence. This is the base:

Wide shot of a stone lighthouse on a cliff at dusk. Slow push-in. [WEATHER LINE]

Then try each of these in the brackets:

Light drizzle beads on the stone and the grass is dark and wet. Soft gray light.
Dense fog swallows the lower cliff. The lamp beam becomes a visible cone in the haze.
Gentle snowfall, large slow flakes. A thin layer of snow sits on the railing and the roof.
Storm gale. Grass flattens in waves, spray leaps off the rocks, and one lightning flash lights the tower in hard white.

Because the camera and subject stay the same, you see which wording changes the image and which does nothing. If you want ten prompt variations and a matching caption for each from one idea, LzyPrompt writes them, and you can download them as a CSV to compare side by side. Once you pick a winner, the color grading prompts help you keep the look consistent across the set.

How do I add weather sound?

Weather is half sound. The Veo guide says to “clearly specify if you want audio” and to “use separate sentences in your prompt to describe the audio.” It separates sound effects (“individual, distinct sounds that occur within the scene”) from ambient noise (“the general background noise that makes a location feel real”).

Medium shot of a woman under a bus shelter on a gray afternoon in steady rain. Slow push-in. Rain drums on the metal roof, tires hiss through puddles, and a bus engine idles in the distance.
Wide shot of a snowy street at dawn. Static camera. The street is muffled and quiet, with a faint wind and one set of boots crunching on fresh snow.
Wide shot of a foggy harbor at night. Static camera. A low foghorn sounds twice, far away. Water laps softly against the pilings and a rope creaks.
Wide shot of a farmhouse under storm clouds. Static camera. A bright lightning flash lights the field. About a second later a long, low thunder roll rumbles across the sky, then rain builds on the roof.

The gap between flash and thunder is what sells distance. I write it as a sequence in plain sentences, with the sound after the flash.

Kling’s VIDEO 3.0 guide shows ambient phrasing such as “a soft wind rustling,” which you can copy in shape for gusts and rain. For a deeper look at layering voices, ambience and effects, see the Veo 3.1 audio prompts.

Audio support differs by model. As of November 2026, Kling VIDEO 3.0 offers “Native Audio” and “No Native Audio” modes. Alibaba’s Wan image-to-video guide says wan2.6-i2v-flash generates sound from the visuals and that you set audio=false for a silent video. Runway’s API model list describes Veo 3.1 as generating audio and speech.

How long should a weather clip be?

Steady weather (constant rain, fog, falling snow) works at any length. Weather that changes (a storm building, snow piling up) should be one beat inside the clip, or use the longest length your model offers.

ModelClip lengthSource
Veo 3.1 (Vertex AI)4, 6 or 8 seconds (reference image to video supports only 8)Google Cloud
Kling VIDEO 3.03 to 15 secondsKling guide
Wan image-to-video2 to 15 seconds, varies by model (for example wan2.6-i2v-flash)Alibaba Cloud
MiniMax-H34 to 15 secondsMiniMax

In a short clip, give the build-up one beat only (a single lightning flash) and put the rest of the weather in a steady state. Kling says it defaults to a single-shot video unless Multi-Shot is on, so a “calm, then storm” cut needs that setting.

Can I add weather to a clip I already have?

Yes, with a video-to-video tool. Runway’s Change Weather app lets you describe conditions such as rain, fog, overcast, golden hour or snow, or use presets. That is a different workflow from writing a text prompt, so the wording above applies to text-to-video.

What should I do next?

Pick one scene and run the weather swap above: drizzle, steady rain, fog, snow, a storm. For slow weather detail, pair these with slow motion prompts.

Frequently Asked Questions

Should weather go at the start or end of a prompt?

Put the main weather near the start of the scene description so it shapes the whole shot, then repeat its effect on surfaces and light later. Keep audio in its own sentences at the end.

Why does my rain look like a transparent overlay?

The prompt probably describes only the falling drops. Add wet surfaces, reflections, mist and a backlight so the rain lights up and the scene reacts to it.

How many weather words should one prompt use?

One main condition plus its effects is enough. Mixing rain, snow, fog and wind in one short clip usually muddies the image, so test each on its own first.

Do I need a different prompt for each video model?

The physical details (drop size, fall speed, depth layers, wind on cloth) read the same to any model. Mostly audio syntax, clip length and settings change, so check each maker's guide for those.

Bank K.

Bank K.

Founder, LzyPrompt

Builder of LzyPrompt. Creates AI video prompts to help content creators save time generating professional videos for YouTube Shorts and Facebook Reels.

@ifourth on X

Ready to Try LzyPrompt?

Create professional AI video prompts in seconds. Start your free trial today.

Start Free Trial

© 2026 LzyPrompt.com by 3AM SaaS OÜ | All rights reserved | Secure login via Beag.io